The Gold Medi Test Plus BUP Urine Rapid Test is designed for the rapid and qualitative detection and identification of buprenorphine in urine, intended solely for forensic and in vitro diagnostic use.
This test operates based on the immunochromatography method, with a sensitivity of 10 ng/mL. This test is for rapid screening only and provides a preliminary result. A more specific alternative method should be used to confirm initial results; High-Performance Liquid Chromatography (HPLC) is the preferred method for this purpose. If the test result is positive, clinical examinations are necessary to determine substance abuse.
The Rapid Buprenorphine Test (Strip) is designed for the rapid, qualitative detection of buprenorphine in urine. This test is for in vitro diagnostic use, intended for quick drug screening, and operates based on the immunochromatography method.
This test is used for the rapid identification and detection of buprenorphine abuse in urine. It can serve as a preliminary result for assessing an individual’s drug status.
To use, apply the patient’s urine onto the strip provided in the kit. The test result will be displayed after a few minutes. This test is for preliminary identification only. If positive, clinical evaluations such as chromatography should be performed to confirm the result and for a more precise assessment.
This test is designed solely for diagnostic pharmaceutical use and in vitro detection.
Buprenorphine can cause side effects such as respiratory depression, drowsiness, allergic reactions, and opioid addiction.
The risk of seizures is higher in individuals with a history of seizures.
Store the kit at 2 to 30 degrees Celsius, away from humidity and direct sunlight.
Avoid using expired, faulty, or previously used kits.
The test strip must be kept in its aluminum packaging until use. Use the test strip immediately upon opening the aluminum pouch.
Due to the infectious nature of all samples, adherence to hygiene protocols is essential.
Always interpret results under appropriate lighting conditions to prevent errors during interpretation. Results read after 10 minutes are invalid.
If the aluminum pouch has been stored at 2 to 8 degrees Celsius (refrigerator temperature), allow it to sit at room temperature for at least 15 minutes before opening.
